Continuing/Stopping Scanning After An Error - Fujitsu ScanSnap S510M Operator's Manual

■ Continuing/stopping scanning after an error

If an error such as the paper jam occurs while you scan a document containing more than one
pages, you will see the following message.
You can continue or stop scanning using the following procedure.
Operation
To continue scanning:
1. Check the last scanned page in the "ScanSnap Manager - Message" window.
2. Load the un-scanned pages back onto the ADF.
3. Click the [Continue Scanning] button or press the [SCAN] button
ScanSnap to restart the scanning.
To quit scanning:
1. Click the [Quit] button.
⇒
The following window appears.
178
on the