Configuring Dip Switch Settings (Ha-A61Io) - Casio DT-X5 Series User Manual

Using the Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO)

Configuring DIP Switch Settings (HA-A61IO)

Dismounting the bottom cover of the Bridge Satellite Cradle exposes the DIP switches.
You can change the ON/OFF settings of the DIP switches to set the configuration. Please
set after first switching OFF the power.
1 2 3 4 5 6 7 8
Important!
Note that other DIP settings are used for testing and inspection purposes. Because
of this, you should never use any DIP settings other than those described above.
E-54
Not used (Always off)
Not used (Always off)
Host Computer Interface
Setting
RS-232C
USB
Daisy Chain
Setting
Intermediate Unit
Daisy Chain Disabled/Termination
Connection Type
Setting
Host Computer
Daisy Chain
Bridge Satellite Cradle Data Rate
Setting
115,200bps
*Initial factory default setting
6
OFF
ON
*
5
OFF
ON
*
3 4
OFF OFF
*
ON OFF
1 2
ON OFF
*