If Reset Finds A Memory Problem; To Perform A Full Reset - Casio DT-X5 Series User Manual

If reset finds a memory problem

A message like the one shown below appears on the display when the reset operation
discovers a memory problem.
When this message appears, press the R trigger key to continue with the reset operation.
Note, however, that reset may not be successful depending on the condition of the
memory. In this case, perform the full reset operation described on the next page.

To perform a full reset

Important!
Performing a full reset deletes all data currently stored in the memory (RAM). If
possible, backup data of the Handheld Terminal to a computer, Flash Memory, a
memory card, or some other medium before performing a full reset.
1. The following message is displayed when the reset switch is pressed for about one
second with a pen or similar object while pressing the power key.
• To cancel the full reset operation, press the L trigger key instead of the R trigger key.
2. Press the R trigger key. This causes the message shown below to appear.
• To cancel the full reset operation, press the L trigger key instead of the R trigger key.
3. Press the R trigger key again.
• Full reset is performed, all data in the memory (RAM) are erased and the start-up
screen is displayed.
L trigger
key
L trigger
key
L trigger
key
R trigger
key
R trigger
key
R trigger
key
E-45