Table of Contents
Advertisement
Using the Cradle-type Battery Charger
Using Wall Mount Unit
To wall mount the Cradle-type Battery Charger, use the same procedure as that described
for the Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO) on page
55.
Removing the Fall Protector
The procedure is the same as that for the Bridge Satellite Cradle (HA-61IO)/Bridge
Basic Cradle (HA-A60IO). Refer to page 53.
Cradle-type Battery Charger (HA-A30CHG) Specifications
1. Charging
Charging System:
Charge Time:
2. Power Supply
Power Requirement:
Power Consumption:
Output to Handheld Terminal: 5V DC 1.5A (max.)
3. AC Adaptor
Model:
Input:
Output:
4. Dimensions and Weight
Dimensions:
Weight:
5. Operating Environment
Temperature:
Humidity:
E-62
Fixed-voltage (with current limiter)
Approximately 5 hours (HA-A20BAT battery pack)
Approximately 10 hours (DT-5025LBAT large-capacity battery pack)
AC adaptor (AD-S42120A)
12V DC, approximately 0.9A
AD-S42120A
100V to 240V AC 50/60Hz
12V DC 3.5A
Desktop: Approximately 110(W) X 125(D) X 128(H) mm
3
15
(4
⁄
"W × 4
⁄
8
Wall Mount: Approximately 110(W) × 148(D) × 153(H) mm
(4
3
⁄
"W × 5
8
Desktop: Approximately 510g (16.6oz)
Wall Mount: Approximately 600g (22.2oz)
0°C to 40°C (32°F to 104°F)
30% to 80% RH (non-condensation)
1
"D × 5
⁄
"H)
16
16
7
⁄
"D × 6"H)
8
Advertisement
Table of Contents
