Casio DT-X5 Series User Manual page 62

Using the Cradle-type Battery Charger
1 AC Adaptor Jack
2 Wall Mount Unit
Fastening Plate
3 Terminal Detect
Switch
4 Power Contacts
5 Power Indicator
Lamp
6 Power Switch
7 Desktop Unit
8 Fall Protector
9 Car Mounted
Battery Charger
Attachment Holes
E-60
Connect the AC adaptor (sold separately) here.
The holes in this plate accept screws that secure the wall mount
unit in place.
This switch detects when the Handled Terminal is not seated
correctly on the Cradle.
Power is supplied to the Handheld Terminal via these contacts.
This lamp indicates the power status and the mounting status of
the Handheld Terminal.
Off: Power off
Red: Power on, Handheld Terminal not mounted
Green: Power on, Handheld Terminal mounted correctly
Turns the power on and off.
This is the base when using the Cradle in a desktop configuration.
Remove the desktop unit in the case of a wall-mount
configuration.
This is a removable attachment that prevents the Handheld
Terminal from tipping over and falling.
This is used when attaching the separately sold Battery Charger
Car Mount Unit (HA-A34AT).