Reset Operation And Battery Replacement; Reset Operation And Full Reset - Casio Cassiopeia E-125 Service Manual And Parts List

5. RESET OPERATION and BATTERY REPLACEMENT

5-1. Reset Operation and FULL RESET

Resetting the Unit
"Reset" is similar to a computer reboot. Performing a reset deletes any data that is in the process of
being input or edited, without yet being saved. Data stored in memory and all settings, however, are
retained.
Perform the reset operation whenever the unit fails to operate correctly due to operational error or some
other abnormality. Any of the following symptoms indicate that reset is required.
• Failure of the unit to respond when the screen is tapped or a button is pressed.
• The hourglass icon remaining on the screen.
Performing a Reset
1. Use the stylus to press the RESET button.
• The unit performs a reset followed by a memory check operation.
If no data error is found, the following two screens appear on the display in succession.
• Startup screen
• Desktop
2. Normal unit operation is possible after the desktop appears.
• Memory data and settings are retained when you reset the Pocket PC.
Important
If the above operation does not solve the problem, perform a full reset.
Memory Error Message
If the memory check operation that the unit performs when the RESET button is pressed detects a data
error, the following message appears on the screen instead of the startup screen.
"A problem with memory contents has been found. Press [Action] to continue with the reset
procedure, which restores normal system operation.
Note that if the system determines that user memory cannot be repaired, it will delete all user
data currently in memory.
See the User's Guide for details about initializing memory."
This message indicates that the memory error is fatal and so recovery is impossible.
Press the [Action] control to execute a full reset (memory initialize), which deletes all data stored in
memory.
• Pressing the [Action] control should display the Startup screen followed by the touch screen
calibration screen. Perform steps 5 through 6 under "Initial Setup" to set up the unit.
• If pressing the [Action] control returns to the desktop without displaying the startup screen first, see
the following explanation for the procedure you need to follow.
What to do if the startup screen does not appear when you press the [Action] control
Even though the desktop appears when you press the [Action] control, there is still a data error in
memory and you have to perform a full reset (memory initialize). Before you do, however, there is the
chance that some of the data in memory can be recalled and even transferred to a computer. Try recalling
the data you need before performing the procedure described on the next page to perform a full reset.
— 23 —