Inserting The Accessories - AEG PROCOMBI PLUS BS7304001 User Manual

18 www.aeg.com
When the meat is at the set core
temperature, an acoustic signal sounds
for two minutes and the value of the core
temperature and
deactivates.
7. Touch a sensor field to deactivate
the acoustic signal.
8. Remove the core temperature sensor
from the socket and remove the
meat from the appliance.

9.2 Inserting the accessories

Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
flash. The appliance
WARNING!
Be careful when you remove
the core temperature
sensor. It is hot. There is a
risk of burns.
CAUTION!
Do not use the baking tray
or deep pan with the Full
Steam function.
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
• All accessories have small
indentations at the top of
the right and left side to
increase safety. The
indentations are also anti-
tip devices.
• The high rim around the
shelf is a device which
prevents cookware from
slipping.
9.3 Trivet and Grill- / Roasting
pan
WARNING!
Be careful when you remove
the accessories from a hot
appliance. There is a risk of
burns.
You can use the trivet to roast larger
pieces of meat or poultry on one shelf
position.
1. Put the trivet into the deep pan so
that the supports of the wire shelf
point up.