Messages and instructions | Errors without error message
Error pattern
• No milk foam /
milk output, but milk
in milk container
• Milk foam not OK
• Temperature too cold
or too hot
• The milk foam
dispensing spits
strongly
• Milk too hot
• No powder beverage
dispensing
• Pump runs
continuously, water in
grounds container
• Choc hopper cannot be
replaced
• Bean hopper cannot be
replaced
User Manual WMF 5000 S
Action instructions
Check whether the milk hose is kinked or squashed
Re-route milk hose correctly
Easy Milk: clean the combi spout
Dynamic Milk: clean combi spout manually
Dynamic Milk: add milk and touch "Fill milk
system" in the customer care menu
w Fill milk system, page 32
Check whether milk cooler is iced
Clean the combi spout
w Care w Clean milk system manually, page 66
Check whether the milk system has been cleaned
Clean the milk system
Check whether the milk has been cooled
sufficiently
Clean the mixer bowl
Is the hose kinked?
Perform milk cleaning and rinsing oftener, if
necessary daily
w Care w Cleaning intervals overview, page 59
w Care w Clean milk system manually, page 66
Dose less powder
Dose more water
Switch off the coffee machine and on again
If error not remedied call WMF Service
Manually turn the drive for the dosing auger at the
portion controller slightly in a clockwise direction
Check whether Choc hopper is accidentally locked
Check whether bean hopper is accidentally locked
79