Tools Required For Assembly Note: It requires at least three people to assemble an IDEA Panoramic. To maintain optimal projected image geometry and screen assembly alignment, a flat and straight wall free from obstructions and angular distortions should be used.
Page 3
5. Raise assembly on edge by lifting one of the long sides to a vertical position perpendicular with the floor. The side with the Da-Lite badge on the middle panel must be closest to the floor. Note: During Steps 6-9, the screen assembly will need to remain #8 x 1/2”...
Page 4
Assembly (continued) 6. Center middle aluminum tray with the top of the vertically Note: Straight and even alignment of the tray sections will upright middle panel and attach with (5) #8 x 1/2” screws. Insert maintain rigidity of the screen assembly when installed on screws through the tray into the groove of the frame (Figure 2a).
Center the middle bracket with the supplied Da-Lite spray cleaner and cleaning cloth or a melamine middle panel. Place the side brackets 5” from the side edge of the foam cleaning pad.
Page 8
INTERRUPTION IN OPERATION OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL DAMAGES OF ANY NATURE. In the event that there is a defect in materials or workmanship of a Da-Lite product, you may contact our Sales Partners at PO Box 137, Warsaw, IN 46581-0137, (574) 267-8101, (800) 622-3737.