Page 1
I N S T A L L A T I O N I N S T R U C T I O N S Instrucciones de instalación Istruzioni di installazione Installationsanleitung Installatie-instructies Instruções de Instalação Instructions d´installation IDEA™ Interactive Rear Projector Cart Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description 22516/22951...
--SAVE THESE INSTRUCTIONS-- Da-Lite® is a registered trademark of Milestone AV eBeam™ Interactive System Requirements Technologies. All rights reserved. The eBeam™ Interactive system works with standard projectors and Windows®...
Installation Instructions 22516/22951 DIMENSIONS-3:4 Cart 74.8 11.2 31.5 CENTER OF PROJECTOR TO SCREEN 21.2 MAX 69.3 79.0 55.1 82.9 MAX 77.9 MID 37.4 72.9 MIN 34.1 MAX 29.1 MID 24.1 MIN (3 POSITIONS) 27.0 16.6 DIMENSIONS-16:10 Cart...
Page 4
22516/22951 Installation Instructions LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación...
Installation Instructions 22516/22951 TOOLS REQUIRED FOR INSTALLATION 1/2” (12.7mm) 3/16” (included) 5/32” (included) PARTS C (1) B (1) [projector boom arm] [leg and cross bar assembly] A (1) [IDEA™ screen] EBeam Interactive Kit (1) G (1) D (1) [height-adjust beam]...
Page 6
22516/22951 Installation Instructions Assembly And Installation Cart Assembly Use eight 5/16-18 x 2 1/2” button head cap screws (W) and eight 5/16” washers (Y) to secure two side columns (H) to leg and cross bar assembly (B). (See Figure 1)
Page 7
Installation Instructions 22516/22951 Slide height-adjust beam (G) inside top telescoping shroud (L) in preparation for installation to cart. (See Figure 4) (rear view) Install top telescoping shroud (L) with height-adjust beam (N) x 2 (G) into opening of screen tray and cross assembly (D).
22516/22951 Installation Instructions IDEA™ Screen Installation Slide inner top frame (E) into outer top frame (F), making CAUTION: Do NOT over-tighten screws or screen may be sure screws on inner frame are aligned with holes on outer damaged! top frame. (See Figure 7)
Installation Instructions 22516/22951 Cable Management From Projector Use two 1/4-20 x 3/8” Phillips pan machine screws (AA) to On Side Columns (Monitor Arm Accessory) secure two cable clips (P) along base of cross bar Slide two #10-24 square nuts (V) into side columns (H) prior assembly.
Page 10
22516/22951 Installation Instructions Adjustments Projector Location Adjustments Boom Arm Position Height Adjustments IDEA™ Screen Loosen screws holding base bracket to projector arm. (See Figure 16) Slide projector along projector arm until desired projector position is reached. (See Figure 16) CAUTION:...
Page 11
Installation Instructions 22516/22951 Pitch Adjustment Loosen Pitch adjustment locking screw. (See Figure 17) Turn Pitch micro-adjustment screw right or left until image is properly aligned on screen. (See Figure 17) Tighten Pitch adjustment locking screw. (See Figure 17) (projector not shown...
Page 12
22516/22951 Installation Instructions Da-Lite Screen Company, LLC 3100 North Detroit Street P.O. Box 137 Warsaw, IN 46581-0137 Phone: 800.267.8101 Toll Free: 574.267.3737 8800-002223 Rev03 Fax: 574.267.7804 06/13 Toll Free Fax: 877.325.4832 www.da-lite.com info@da-lite.com...