Table of Contents
Advertisement
Quick Links
I N S T A L L A T I O N
Small Flat Panel
Tilt Wall Mount (GPM-110)
The GPM-110 tilt wall mount is designed to adapt to
VESA® 75mm/100mm compliant displays.
The GPM-110 allows the user to adjust the viewing angle
+
of the mount
15 degrees horizontally or vertically by
hand, depending on the preferred type of installation.
After adjusting the display to the desired angle, the user
can lock the mount into a fixed position. The user can
easily remove the display from the wall bracket when the
mount is unlocked.
BEFORE YOU BEGIN
•
CAUTION: To prevent damage to your display, which could affect or void the Factory warranty,
thoroughly study all instructions and illustrations before you begin to install the mount brackets. Pay
particular attention to the "Important Warnings and Precautions" on Page 2.
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE. 700
SAVAGE, MINNESOTA 55378 USA
I N S T R U C T I O N S
GPM-110
8807-000019 Rev. A
2004 Chief Manufacturing
www.chiefmfg.com
06/04
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CHIEF GPM-110
Summary of Contents for CHIEF GPM-110
-
Page 1: Before You Begin
Pay particular attention to the “Important Warnings and Precautions” on Page 2. • If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480. CHIEF MANUFACTURING INC. 8807-000019 Rev. A... -
Page 2: Table Of Contents
110 is anchored will safely support the combined load of all attached components or other equipment. • The combined weight of the display placed on the GPM-110 must not exceed 40 lbs. WARNING (18.1kg), the maximum load capacity of the mount. -
Page 3: Gpm-110 Tilt Mount Kit
Unpack the carton. Verify the kit contains the contents shown in Table 1. Read installation instructions completely. If you are missing any of the listed components, please contact Customer Service at 1-800/582-6480. Table 1. GPM-110 Tilt Mount Kit ITEM NUMBER... -
Page 4: Installation Instructions
Instruction Manual GPM-110 Installation Instructions NOTE: Read the “Important Warnings and Precautions” on Page 2. Step 1 Installing the Wall Bracket (Step 1) The wall bracket can be mounted vertically or horizontally. Mounting the bracket vertically allows you to tilt the display up and down. -
Page 5: Attaching The Vesa Bracket To The Display (Step 2)
Instruction Manual GPM-110 Attaching the VESA Bracket to the Display Step 2 (Step 2) NOTE: Choose the instructions, listed below, that apply to the type of installation you want. • Flush Mount Applications do not use spacers. The display is attached to the mount with four screws. -
Page 6: Mounting The Display On The Wall Bracket (Step 3)
Instruction Manual GPM-110 Mounting the Display on the Wall Bracket Step 3 (Step 3) With the aid of another person (if necessary), lift the display up to the wall bracket (20) over the four mounting pins. Align the mounting pins on the display with the slots in the wall bracket (20), and set the display into place.
Need help?
Do you have a question about the GPM-110 and is the answer not in the manual?
Questions and answers