ZyXEL Communications P-660R-T1 Support Notes page 70

2. One rule for blocking all packets from this client
Menu 21.1.1 - TCP/IP Filter Rule
Filter #: 1,1
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 0
Destination: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #=
Port # Comp= None
Source: IP Addr= 192.168.1.5
IP Mask= 255.255.255.255
Port #=
Port # Comp= None
TCP Estab= N/A
More= No
Action Matched= Drop
Action Not Matched= Forward
Press ENTER to Conf
Key Se ttings:
Source IP addr................Enter the client IP in this field
IP Mask..........................Here the IP mask is used to mask the bits of the IP address
given in the 'Source IP Addr=' field, for one works
Action Matched................Set to 'Drop' to drop all the packets from this client
Action Not Matched.........Set to '
3. Appl y the filter set n
remote node setup.
A filter for blocking a specific MAC address
This co nfiguration example shows you how to use a Generic Filter to block a specific
MAC a ddress of the LAN.
Before you Begin
All contents copyright © 2005 ZyXEL Communications Corporation.
IP Source Route= No
Log= None
irm or ESC to Cancel:
Forward' to allow the packets from other clients
umber '1' to the 'Output Protocol Filter Set' field in the
P-660 series Support Notes
tation it is 255.255.255.255.
69