Setup The P-660 As A Dhcp Relay - ZyXEL Communications P-660R-T1 Support Notes

Key Settings:
Option Description
Select the correct Encapsulation type that your ISP supports. For example,
Encapsulation
RFC 1483.
Select the correct Multiplexing type that your ISP supports. For example
Multiplexing
LLC.
VPI & VCI Specify a VPI (Virtual Path
number given to you by your ISP.
Single User Set to Yes if you only have a single IP account for sharing with local
Account comput
IP Address Set to Dynamic if the ISP provides the IP for the P-660 dynamically.
Assignment Otherwise, set to Static and enter the IP in the following IP Address field
This field can not be configured if the ISP provides the IP for the P-660
IP Address
dynamically. Otherwise, enter the IP that the ISP gives to you.

3. Setup the P-660 as a DHCP Relay

What is DHCP Relay?
DHCP stands for Dynamic Host Configuration Protocol. In addition to the DHCP
server feature, the P-660 supports the DHCP relay function. When it is configured
DHCP server, it assigns the IP addresses to th
DHCP relay, it is responsible for forwarding the requests and responses negotiating
between the DHCP clients and the server. See figure 1.
All contents copyright © 2005 ZyXEL Communications Corporation.
My Password= ********
Idle Timeout (sec)= 0
IP Address Assignment=
IP Address= N/A
Network Address Translation=
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Id entifier) and a VCI (Virtual Channel Identifier)
ers.
P-660 series Support Notes
Dynamic
SUA Only
e LAN clients. When it is configured as
,
.
as
31