Using Bandwidth Management - ZyXEL Communications P-660R-T1 Support Notes

My WAN Addr= 0.0.0.0
NAT = None
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies=
Enter here to CONFIRM or ESC to CANCEL:
Key Settings:
IGMP-v1 for IGMP version 1, IGMP-v2 for IGMP version 2.
Multicast
14. Using Bandwidth Man
• Why Bandwidth Management (BWM)?
Nowadays, we have many different traffic types for Internet applications. Some traff
may consume high bandwidth, such as FTP (File Transfer Protocol), if you are
downloading or uploading files with large size. Some other traffic may not require
high bandwidth, but they requires stable supply of bandwidth, such as VoIP traffic
The VoIP quality would not be good, if all of the outgoing ba
FTP. A ditionally, chances are that you would like to grant higher bandw d
some body special who is using specific IP address
reasons why we need bandwidth m
All contents copyright © 2005 ZyXEL Communications Corporation.
agement
anagement.
P-660 series Support Notes
ndwidth is occupied via
in your network. All of these are
ic
.
idth for
104