Matrox ATC RG-200DL User Manual page 9

ATC RG-200DL – Connect your monitors to
the monitor connectors at the back of your
Extio unit.
If your monitors have DVI connectors,
connect them directly to the DVI monitor
connectors ( ) at the back of your unit.
A
If your monitors have HD-15 connectors,
connect them directly to the HD-15 monitor
connectors (
) at the back of your unit.
B
Note: While a DVI monitor is connected
to a DVI connector on your unit, the
corresponding HD-15 connector is
disabled.
Connect the power supply
3
Attach one end of the power supply cable
provided with your Matrox product to the
power connector on your Matrox product.
Plug the power supply cord into an electrical
outlet.
Connect your input devices
4
(optional)
To use a keyboard or mouse, simply connect
a USB mouse or keyboard to one of the USB
connectors on your unit. There are 2 USB
connectors at the back of the unit and 4 at
the front.
Note: USB devices (including keyboard and mouse) are unavailable until Windows starts.
Monitor
connector (DVI)
Monitor connector
(HD-15)
Power supply
cable
USB connectors
Matrox RG Series – User Guide 9