Matrox ATC RG-200DL User Manual page 3

3 Install the software. Your Matrox ATC RG product supports a number of operating
systems such as Windows, Unix, and Linux. To obtain a display driver for your operating
system, contact your Matrox representative.
Note: Windows XP SP2 (Service Pack 2) – Windows may install a Matrox display driver
unsupported by your product when the hardware in your unit is detected. If you aren't
prompted to install a display driver, DON'T RESTART your system. Manually install the
display driver on your Matrox installation CD-ROM before you restart.
If you're installing an ATC RG-200DL unit with a dual link digital monitor, the display
driver used by Windows Service Pack 2 may disable your dual link DVI connector and
enable the HD-15 connector. To install a driver that supports the dual link feature of your
Matrox product, you need connect an analog monitor to the HD-15 connector.
Matrox RG Series – User Guide 3