Operation; Control Panel Operation; Menu Map; Dmx Configuration - Chauvet 4BAR User Manual

4. O
PERATION
Control Panel

Operation

Menu Map

DMX
Configuration

Starting Address

Page 8 of 14
To access the control panel functions, use the four buttons located underneath the
display.
Button
<MENU>
Selects an operation mode or to backs out of the current menu option
<UP>
Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
Mode Programming Steps
3-CH
DMX
Personalities 15CH
Sound Active
Mode
Automatic Mode
Auto Program
S--
Speed
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The 4BAR™ uses up to 15 DMX channels in single DMX mode, which defines the highest
configurable address to 498.
If unfamiliar with DMX or DIP switches, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 512, AUTO, or SND shows on the display.
2. Immediately use <UP> or <DOWN> until 512 shows on the display (if it is not
showing already).
3. Wait 5 seconds until 3-CH or 15CH shows on the display.
4. Press <MENU> until A.*** shows on the display.
5. Use <UP> or <DOWN> to select the starting address.
Function
Description
d 1–d512
Sets DMX personality and starting address
Sets Sound Active mode
SND
AUTO Sets Auto Program
S 1–S100 Sets Auto Program speed
4BAR™ User Manual (Rev. 6)