Mounting; Orientation; Rigging - Chauvet 4BAR User Manual

Mounting

Orientation

Rigging

Mounting Diagram
4BAR™ User Manual (Rev. 6)
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The 4BAR™ may be mounted in any position; however, make sure adequate ventilation
is provided around the product.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use mounting clamps of
appropriate weight capacity.
·
The adjustment knobs allow for directional adjustment when aiming the product to
the desired angle. Only loosen or tighten the bracket knobs manually. Using tools
could damage the knobs.
·
When mounting to the tripod, be sure the stand is tightened properly and leveled.
Technical Specifications).
Clamp Hanging Bolts
Tripod Insertion Point
Page 7 of 14