Footswitch Operation - Chauvet 4BAR User Manual

Footswitch
Operation
4BAR™ User Manual (Rev. 6)
The included footswitch provides quick access to preset colors, color-change programs,
and sound-activation through the 4BAR™ microphone.
To use the footswitch:
1. Power the product on.
2. Connect the footswitch to the 4BAR™ with the 4-pin connection cable with plug.
3. Press pedal #1 (Preset) to activate control. When working, all the LEDs will light
white, which is the first function of pedal #1.
4. Use the chart below to activate the desired function.
To disconnect the footswitch:
1. Unplug the footswitch from the 4BAR™.
2. Unplug the power cable from the 4BAR™.
3. Power the 4BAR™ again to operate without the footswitch.
Pedal Sub-option
1 x press
2 x press
3 x press
4 x press
1
5 x press
(Preset)
6 x press
7 x press
8 x press
9 x press
2
N/A
(Sound)
The 4BAR™ footswitch will work properly in any mode. No settings need to be
modified before using the footswitch.
Function
White
Red
Green
Blue
Yellow
Magenta
Cyan
Color change every second in a continuous loop
Color change every 3 seconds in a continuous loop
Sound-activated
Page 11 of 14