Introduction; Unpacking; Warning; Safety - Qtx QTFX-700 mkII User Manual

Caution: Please read this manual carefully before operating

Introduction

Thank you for choosing the QTFX-700 mkII fog machine as part of your stage effects system.
This product is designed to offer reliable fog and smoke effects for stage and theatre use.
Please read these instructions in full to get the best results and avoid damage through misuse.

Unpacking

Your QTFX-700 mkII should reach you in good condition and should be supplied with IEC
mains lead(s), mounting bracket and a wired handheld remote control.
If there are any signs of damage or items missing, contact your dealer immediately.

Warning

To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on the housing or through the vents, disconnect the mains, allow the
QTFX-700 mkII to dry out and have it checked by qualified personnel before further use.
Avoid any impact, dropping or extreme pressure to the housing.
No user serviceable parts inside - do not open the case. Refer servicing to qualified personnel.
Allow the QTFX-700 mkII to acclimatize to room temperature before operating.

Safety


Check for correct voltage and condition of IEC lead before connecting to power outlet
 This unit uses a heating element - do not touch the nozzle area whilst in use!
Symbol and Message Conventions
Safety
RISK OF ELECTRIC SHOCK
This symbol indicates that dangerous voltage constituting a risk of electric shock is
This symbol indicates that there are important operating and maintenance instructions in

Cleaning

 Use a soft dry or slightly damp to clean the casing
 Do not use strong solvents for cleaning the unit
 It is recommended to use fog machine cleaning fluid (160.670UK) periodically
Damage caused by misuse is not covered by the warranty
CAUTION
DO NOT OPEN
the literature accompanying this unit.

RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
present within this unit
AVIS
160.477UK User Manual