Installation Requirements; Hardware Overview - Ubiquiti AirFiber X AF-5G34-S45 Quick Start Manual

Installation Requirements

• airFiber AF‑5X radio (sold separately)
• Phillips #1 screwdriver
• 16 mm wrench
• 24 mm wrench
• Mounting point:
• At least 1 m below the highest point on the structure
• For tower installations, at least 3 m below the top of
the tower
• Shielded Category 6 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.

Hardware Overview

Elevation Rod
Pole Clamp
Protective Shroud
Mounting Bracket
Pole Clamp
Stabilizer Brackets
Fully Assembled Back View