14. Each M10x100 Bolt includes a flat washer, spring lock
washer, and nut. Remove these and use them to secure the
bolts when assembling.
15. Attach the Stabilizer Brackets to the pole just beneath the
area where the antenna will be attached.
Note:
Ø 38 ‑ 101 mm pole.
a. Place one Stabilizer Bracket on each side of the pole.
b. Insert the two M10x100 Bolts into the Stabilizer Brackets.
c. Secure each M10x100 Bolt with one flat washer, one
spring lock washer, and one nut.
d. Tighten the nuts to approximately 50 N‑m.
The mounting assembly can accommodate a
50 N-m