7. Attach the Protective Shroud.
a. Align the arrow on the top of the shroud with the short
hash mark on the Dish Reflector.
b. Rotate the shroud clockwise until it aligns with the long
hash mark to lock into place.
8. The Elevation Rod includes washers and nuts. Remove one
flat washer, one spring lock washer, and one nut. Use them
to secure the Elevation Rod when assembling.
9. Attach the Elevation Rod to the Mounting Bracket.
a. Insert the Elevation Rod into the Mounting Bracket.
b. Secure the Elevation Rod with the flat washer, spring
lock washer, and nut.