CONTROLS
Clutch Lever
The clutch lever engages and
disengages the transmission
that drives the tines.
Drag Bar
The drag bar controls tilling
depth and should always be
used when tilling. It enables
you to compensate for the
hardness of the soil. Ideal drag
bar height will depend on the
type of soil being tilled and soil
conditions at the time of tilling.
In general, the drag bar should
be adjusted so that the tiller is
tilted slightly backward.
Front Wheel
The front wheel is used to help
move the tiller from one place
to another. Lift the tiller by the
handlebars to roll the tiller on
the front wheel. Pull out on the
wheel assembly, move it to
the raised position, and then
release the wheel assembly
before tilling. Always stop the
engine before lowering or
raising the wheel.
12
CLUTCH LEVER
RETAINER
PIN
FRONT WHEEL
ENGAGED
DISENGAGED
DRAG BAR
TILLING
POSITION
TRANSPORT
POSITION