SERVICING YOUR TILLER
Assembly
8.Remove the fuel tank cap. Verify the choke lever is in the CLOSED
position and reinstall the fan cover by inserting the choke rod into
the choke valve hole.
• The choke lever will not operate if the choke rod is not inserted
correctly into the choke valve hole as shown below.
9.Reinstall the neck seal and fuel tank cap as shown.
10.Reinstall the recoil cover, and tighten the recoil cover cap nuts
securely.
CHOKE VALVE
HOLE
32
NECK SEAL
CHOKE ROD
CAP NUT (3)
RECOIL COVER
FUEL TANK CAP
NECK SEAL
FAN COVER