Table of Contents
Advertisement
Please stick the extra data plate for
the appliance supplied with this doc‐
umentation in the space provided in
the "After sales service, data plate,
guarantee" section of this booklet.
Remove any protective wrapping and
stickers.
Cleaning the drawer for the
first time
Open the drawer by pressing lightly
in the middle of the drawer front.
Remove the anti-slip mat from the
drawer and clean it with a solution of
hot water and little washing-up liquid
applied with a clean sponge or clean,
damp microfibre cloth.
Dry the mat with a soft cloth.
Wipe the appliance inside and out
with a damp cloth to remove any dust
or left-over packaging
Dry all surfaces with a soft cloth.
Replace the anti-slip mat in the draw‐
er.
Close the drawer by pressing lightly
in the middle of the drawer front.
Using for the first time
Heating up the drawer for the
first time
Heat the empty drawer for at least
2 hours. Set the temperature control
to maximum (see "Selecting a tem‐
perature").
The metal components have a protec‐
tive coating which may give off a slight
smell when the drawer is heated up for
the first time. The smell and any va‐
pours will dissipate after a short time,
and do not indicate a faulty connection
or appliance. Ensure that the kitchen is
well ventilated.
13
Advertisement
Table of Contents
