Using for the first time
Please stick the extra data plate for
the appliance supplied with this doc‐
umentation in the space provided in
the "After sales service, data plate,
guarantee" section of this booklet.
Remove any protective wrapping and
stickers.
Cleaning the drawer for the
first time
Remove the anti-slip mat and the
rack, if present, from the drawer and
clean them with warm water and a lit‐
tle washing-up liquid applied with a
clean sponge or clean, damp microfi‐
bre cloth.
Dry the mat and the rack with a soft
cloth.
Wipe the drawer inside and out with a
damp cloth to remove any dust or
left-over packaging
Dry all surfaces with a soft cloth.
Replace the anti-slip mat and the
rack (if applicable) in the drawer.
16
Heating up the drawer for the
first time
Heat the empty drawer for at least two
hours.
Switch the drawer on by touching the
On/Off sensor.
Touch the sensor repeatedly until
the symbol lights up.
Touch the sensor repeatedly until
the segment on the far right hand
side of the temperature display lights
up.
Touch the sensor repeatedly until
2h lights up.
Close the drawer.
The drawer will switch itself off auto‐
matically after two hours.
The drawer is fitted with a contact
switch, which ensures that the heating
element and fan in the appliance only
work when the drawer is closed.
The metal components have a protec‐
tive coating which may give off a slight
smell when the drawer is heated up for
the first time. The smell and any va‐
pours will dissipate after a short time,
and do not indicate a faulty connection
or appliance. Ensure that the kitchen is
well ventilated.