Before First Use; Cleaning The Drawer For The First Time; Heating Up The Drawer For The First Time - Miele ESW7670OB Operating And Installation Instructions

Before first use

 Remove any protective foil and stick-
ers.
 Do not remove stickers carrying
safety or installation information or
the data plate.
This makes it easier to perform servic-
ing and repair work.
Cleaning the drawer for the
first time
 Remove the non-slip liner and (if
present) the wire rack from the
drawer. Clean both with warm water
and liquid dish soap, applied with a
soft sponge or microfiber cloth.
 Dry the non-slip liner and the wire
rack with a soft cloth.
 Wipe the drawer inside and out with a
damp cloth to remove any dust or
left-over packaging.
 Dry all surfaces with a soft cloth.
 Replace the non-slip liner and the
wire rack (if applicable) in the drawer.
16
Heating up the drawer for the
first time
Heat the empty drawer for at least
2 hours.
 Touch the  sensor control to switch
the drawer on.
 Touch the Menu sensor control re-
peatedly until the  symbol lights
up.
 Touch the Temperature sensor control
repeatedly until the segment on the
far right-hand side of the temperature
display lights up.
 Touch the Duration sensor control re-
peatedly until 2 h lights up.
 Close the drawer.
The drawer is equipped with a contact
switch. This ensures that the heating
element and fan in the appliance only
work when the drawer is closed.
The drawer will switch itself off auto-
matically after 2 hours.
The metal components have a protec-
tive coating. For that reason they will
give off a slight smell temporarily when
the drawer is heated for the first time.
The smell and any vapors given off will
dissipate after a short time and do not
indicate a faulty connection or appli-
ance.
It is important to ensure that the kitchen
is well ventilated when heating the
drawer for the first time.