Front Panel - Inter-m PSI-5120A Operation Manual

Hide thumbs Also See for PSI-5120A:

Table of Contents

Front Panel

1. USB TERMIN L

USB terminal input for stored music files, can be played on USB function.

2. TONE CONTROL VOLUME

This is a volume to control tone of signal. You can adjust each frequency band such as

200Hz/500Hz/1.2KHz/3KHz/8KHz. Select the relevant frequency with the tone button and control volume

with the (+/-) button. (Control range: ±8dB)

3. EQU LIZER MODE SELECT BUTTON

If pressing this button once, you can check setting status of the current EQ mode. Whenever you press the

button, the mode changes in order of USER 1 → USER 2 → USER 3 → USER 4 → USER5 → OFF. After

adjusting the tone, press the button long (about 2 seconds), then the setting is saved in the relevant mode.

4. DISPL Y

This is a window to display system information of the operation.

5. INPUT SELECT (FUNCTION) BUTTON

This is a button to select input signal and you can select one of FM TUNER, CD, USB, DRP, AUX 1, AUX 2, or

DIGITAL INPUT. AUX 1/2 is changed whenever pressing the AUX button.

6. DISPL Y MODE SELECT BUTTON

Button to check the remaining time of current selection.

DIGITAL PA SYSTEM

PSI-5120A/5240A

Table of Contents

Psi-5240a