Vitocom 100, Type Gsm2 - Viessmann VITODENS 242-F Technical Manual

Control units
(cont.)
The Vitotrol app supports the following end devices:
■ Terminal devices with Apple iOS operating system version 6.0
■ Terminal devices with Google Android operating system Version 4.0
or higher
Note
For more information, see www.vitotrol-app.info.
Functions when operating with Vitodata 100:
For all heating circuits in a heating system:
■ Remote monitoring:
– Forwarding messages via email to terminal devices with email cli-
ent function
– Forwarding messages via SMS to mobile phone/smartphone or
fax (via chargeable internet service Vitodata 100 fault manage-
ment)
■ Remote control:
Selecting operating programs, set values, time programs and heat-
ing curves
Note
For more information, see www.vitodata.info.
Configuration:
Configuration takes place automatically.
When the DHCP service is enabled, no adjustments have to be made
on the DSL router
Standard delivery:
■ Vitocom 100, type LAN1 with LAN socket
■ With or without communication module LON for installation in the
Vitotronic control unit
■ Connecting cables for LAN and communication module
■ Power cable with plug-in power supply unit
■ Vitodata 100 fault management for a duration of 3 years
On-site requirements:
■ The communication module must be installed in the control unit
■ Before commissioning, check the system requirements for commu-
nication via the IP networks (LAN)
■ Internet connection with flat rate data (without time or volume
restrictions)
■ DSL router with dynamic IP addressing (DHCP)

Vitocom 100, type GSM2

Part no.: See current pricelist
For remote monitoring and remote control of a heating system via
mobile phone networks
For the transmission of messages and settings for operating programs
by means of SMS
Compact device for wall mounting
7
Functions:
■ Remote monitoring via SMS to 1 or 2 mobile phones
■ Remote monitoring of additional systems via digital input (floating
contact)
■ Remote setup with mobile phone via SMS
■ Operation with mobile phone via SMS
Note
For more information, see www.vitocom.info.
Configuration:
Mobile phones via SMS
Standard delivery:
■ Vitocom 100 with integral mobile phone modem
■ Connecting cable with Rast 5 system connectors for connection to
the control unit KM BUS
VIESMANN
102
Note
For information on registering and using the Vitotrol app and
Vitodata 100, see www.vitodata.info.
Specification
3 4
Power supply via plug-in power sup-
ply unit
Rated current
Power consumption
Safety category
IP rating
Permissible ambient temperature
– Operation
– Storage and transport
■ Mobile aerial (3.0 m long), magnetic base and adhesive pad
■ Power cable with plug-in power supply unit (2.0 m long)
On-site requirements:
■ Good reception for GSM communication with the selected mobile
phone operator
■ Total length of all KM BUS subscriber cables up to 50 m
230 V~/5 V–
250 mA
8 W
II
IP 30 to EN 60529; ensure
through design/installation
0 to +55 °C
Installation in living spaces or
installation rooms (standard
ambient conditions)
–20 to +85 °C
VITODENS