Installing A Controller - Dell EqualLogic FS7600 Series Hardware Owner's Manual

Dell EqualLogic FS7600 Hardware Owner's Manual 2 Replacing Components
Figure 7: Removing a Controller
6. Pull the handle down and out. See callouts 2, 3, and 4 in Figure 7.
7. Support the controller with two hands, and place it on an antistatic surface.

Installing a Controller

1. Correctly orient the controller with the handle on top.
2. Push the controller into the slot until you feel resistance. See callout 1 in Figure 8.
Figure 8: Installing a Controller
3. Rotate the release latch up (callout 2) and push it in until you hear it click into place.
4. Make sure you cannot pull the controller out.
5. Reconnect all the network cables.
11