Component Identifi Cation - Landa SGP-302214S Operator's Manual

Discharge
Nipple
Quick
Coupler
Collar
Water Supply
Hose
(not included)
Unloader
Spray
Gun
Pump — Develops high pressure.
Starter Grip — (Not Shown) Used for starting the
en gine man u al ly.
Spray Gun — Controls the application of water and
de ter gent onto cleaning surface with trigger device.
In cludes safe ty latch.
Detergent Injector — Allows you to siphon and mix
de ter gents.
6
COMPONENT IDENTIFICATION
Detergent
Injector
Pump
Trigger
High Pressure
Hose
HOME DEPOT SGP • 8.913-917.0 • Rev. 08/13
Gasoline
Tank
Control Wand
Variable Pressure Control Wand — Must be con-
nect ed to the spray gun. This wand handle controls
dishcharge fl ow from one tube to both wand tubes.
When water is discharged from both tubes you will have
a pres sure loss and allows chemical siphoning when
used in combination with a detergent injector.
High Pressure Hose — Connect one end to water
pump dis charge nipple and the other end to spray gun.
Note: If trigger on spray gun is released for more
than 2 minutes, water will leak from valve. Warm
water will dis charge from pump protector onto fl oor.
This sys tem pre vents internal pump dam age.
Starter Grip
Wand Coupler
Variable Pressure
Control wand
Handle
Nozzle
Quick
Coupler
Brass
Soap
Nozzle