Component Identifi Cation - Landa MPE5-50024B Operator's Manual

Optional
Hose Reel
& Mount
High
Pressure
Nozzles
Power
Cord
Pump — Delivers a specifi c gpm to the high pressure
nozzle which develops pressure.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Detergent Injector — Allows you to siphon and mix
detergents (Not Shown).
Wand — Must be connected to the spray gun.
High Pressure Hose — Connect one end to water
pump high pressure discharge nipple and the other
end to spray gun.
4
COMPONENT IDENTIFICATION
8.914-000.0 • 8.917-410.0 • 9.800-340.0 • 8.919-014.0 • Rev. 06/12
Wand
Electrical
Box
Unloader
Valve
High
Pressure
Outlet
Cold Water
Inlet
Rupture Disk — Secondary pressure release in the
unlikely event the unloader valve fails.
Unloader Valve — Safety device which, when the
spray gun closes, prevents over pressurization.
Note: If trigger on spray gun is released for more
than 1-2 minutes, water will leak from the pump
protector. Warm water will discharge from pump
protector onto fl oor. This system prevents internal
pump damage.
Spray Gun
High
Pressure
Hose
Pump
Rupture
Disk
Pump
Protector