Cut-Off - Intermec EasyCoder 401 User Manual

Intermec EasyCoder 401 – User's Manual
PAPER LOAD – CUT OFF
1 2
Turn off the power using the switch on the rear plate. Open the optional cutter unit and the right-hand door.
3
4
Turn the printhead lift knob to "Load" position. Remove the empty paper core, if any.
5a 5b
Fit a new paper roll on the paper supply spool and push In case of paper roll with a 76.2 mm (3 inches) core, first
the roll inwards as far as it will go. fit the adapter on the paper supply spool.
8