Eneo VKC-1362 Installation And Operating Instructions Manual page 22

1) Iris Level
Adjust the DC-type auto iris lens for an optimum picture using this volume.
2) Function Switch
• E/I (on/off)
When set to the ON position, the electronic iris switch automatically varies the camera's
shutter to mimic auto-iris control, allowing fixed or manual iris lenses to be used in a
wider range. When this switch is set to ON, turn the F/F switch OFF.
• FF (on/off)
This function is used for removing flicker, when camera signal format does not coincide
with power source frequency being used.
• BLC (on/off)
This on/off switch controls backlight compensation. When set to ON, the camera will
automatically try to maintain proper exposure in the specific area even if the lighting
level changes.
• AGC (on/off)
The auto gain control switch allows the video signals to maintain a constant level.
This switch is useful when using the camera at low-light levels and when lighting levels
change over time. For best low light conditions, this switch should set to ON.
• Day/Night (Auto/Color)
Use this switch to set the camera Day/Night mode Auto (ON) or Color (OFF)
Auto: D/N mode converse automatically (AGC must set to ON)
Color: Only Color
• DC/AI
Not connected
3) Power Input Terminal
4) Power Indicator
5) Video Output Connector
6) AC Power Cord