Mounting And Verifying The File Systems - HP XP7 Configuration Manual

Mount AUTOMATICALLY at system restart? Enter yes.
CAUTION:
Number of bytes per node. Enter the number of bytes appropriate for the application, or use
the default value.
Example
Add a Journaled File System
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Volume group name
SIZE of file system (in 512-byte blocks)
MOUNT POINT
Mount AUTOMATICALLY at system restart?
PERMISSIONS
Mount OPTIONS
Start Disk Accounting?
Fragment Size (bytes)
Number of bytes per inode
Compression algorithm
Allocation Group Size (Mbytes)
10. Press Enter to create the Journaled File System.
The Command Status screen appears.
Wait for "OK" to appear on the Command Status line.
1 1. To continue creating Journaled File Systems, press the F3 screen. key until you return to the
Add a Journaled File System screen. Repeat steps 2 through 10 for each Journaled File System
to be created.
12. To exit SMIT, press the F10 key.

Mounting and verifying the file systems

Mount the file systems and verify that the file systems were created correctly and are functioning
properly.
1. Mount the file system. Enter:
mount mount_point_name
Example
# mount /vg01
2. Repeat step 1 for each new file system.
3. Use the df command to verify the size of the file systems. The capacity is listed in 512-byte
blocks. To list capacity in 1024-byte blocks, use the df
Example
# df
File system 512-blocks
/dev/hd4
/dev/hd2
/dev/hd9var
/dev/hd3
/dev/hd1
/dev/lv00
/dev/lv01
/dev/lv02
In high availability systems (PowerHA), enter no.
free %Used Iused %Iused Mounted on
8192 3176
1024000 551448
8192 5512
24576 11608
8192 7840
4792320 4602128
4792320 4602128
14401536 13949392
vg01
[4792320]
[VG01]
no
read/write
[]
no
4096
4096
no
*1
k command.
61% 652 31% /
46% 6997 5% /usr
32% 66 6% /var
52% 38 0% /tmp
4% 17 1% /home
4% 16 1% /VG00 (OPEN-3)
4% 16 1% /VG01 (OPEN-3)
4% 16 1% /VG02 (OPEN-9)
Configuring disk array devices 91