Mounting And Verifying The File Systems - HP XP1024 System Configuration Manual

Mounting and verifying the file systems
Mount the file systems and verify that the file systems were created correctly and are
functioning properly.
To mount and verify the file systems:
1.
Mount the file system. Enter:
mount
Example
2. Repeat step 1 for each new file system.
3.
Use the df command to verify the size of the file systems. The capacity is listed in
512-byte blocks. To list capacity in 1024-byte blocks, use the df –k command.
Example
4.
Verify that the file system is usable by performing some basic operations (for
example, file creation, copying, and deletion) on each logical device.
Example
mount_point_name
# mount /vg01
# df
File system 512-blocks
/dev/hd4 8192
/dev/hd2 1024000
/dev/hd9var 8192
/dev/hd3 24576
/dev/hd1 8192
/dev/lv00 4792320
/dev/lv01 4792320
/dev/lv02 14401536 13949392
# cd /hp00
# cp /smit.log /hp00/smit.log.back1
# ls -l hp00
–rw-rw-rw- 1 root
# cp smit.log.back1 smit.log.back2
# ls -l
-rw-rw-rw- 1 root
-rw-rw-rw- 1 root
# rm smit.log.back1
# rm smit.log.back2
Disk Array XP operating system configuration guide: IBM AIX
free %Used Iused %Iused Mounted on
3176 61% 652
551448 46% 6997
5512 32%
11608 52%
7840 4%
4602128 4%
4602128 4%
4%
system 375982 Nov 30 17:25 smit.log.back1
system 375982 Nov 30 17:25 smit.log.back1
system 375982 Nov 30 17:28 smit.log.back2
31% /
5% /usr
66 6% /var
38 0% /tmp
17 1% /home
16 1% /VG00 (OPEN-3)
16 1% /VG01 (OPEN-3)
16 1% /VG02 (OPEN-9)
35