Defining The Paths - HP XP7 Configuration Manual

NOTE: As illustrated in
microprocessor sharing with 8-port module pairs. With 16- and 32-port module pairs, alternating
ports are shared.
Table 1 1 Microprocessor port sharing (OpenVMS)
Channel Model
adapter
AE020A 8HSR
AE006A 16HSR
AE007A 32HSR
AE021A 8FS2R
AE022A 16FS2R
AE023A 32FS2R

Defining the paths

Use XP7 Command View Advanced Edition Software or the XP7 Remote Web Console (shown)
to define paths between hosts and volumes (LUNs) in the disk array.
This process is also called "LUN mapping." In the XP7 Remote Web Console, LUN mapping
includes:
Configuring ports
Enabling LUN security on the ports
Creating host groups
Assigning Fibre Channel adapter WWNs to host groups
Mapping volumes (LDEVs) to host groups (by assigning LUNs)
"Microprocessor port sharing (OpenVMS)" (page
Description
8-port 2GB CHIP Pair
16-port 2GB CHIP Pair
32-port 2GB CHIP Pair
8-port 4GB CHIP Pair
16-port 4GB CHIP Pair
32-port 4GB CHIP Pair
Nr. of ports per Ports shared
microprocessor
1 N/A
2 CL1 - 1 & 5; 3 & 7
CL2 - 2 & 6; 4 & 8
2 CL1 - 1 & 5; 3 & 7
CL2 - 2 & 6; 4 & 8
1 N/A
2 CL1 - 1 & 5; 3 & 7
CL2 - 2 & 6; 4 & 8
2 CL1 - 1 & 5; 3 & 7
CL2 - 2 & 6; 4 & 8
Installing and configuring the disk array
41), there is no
41