Mounting And Verifying The File Systems - HP XP1024 System Configuration Manual

Mounting and verifying the file systems
After the mount directories have been created, mount and verify the file system for
each logical volume.
To mount and verify the file systems:
1. Use mount to mount the file system for the volume.
Example
2.
Repeat step 1 for each logical volume on the disk array.
If you need to unmount a file system, use the unmount command.
3. Use the bdf command to verify that the file systems are correct. The capacity
is listed under Kbytes.
Example
4.
As a final verification, perform some basic UNIX operations (for example file
creation, copying, and deletion) on each logical device to make sure that the
devices on the disk array are fully operational.
Example
# mount /dev/vg06/lvol1
# bdf
Filesystem
/ldev/vg00/lvol1
:
/ldev/vg06/lvol1
#cd /AHPMD-LU00
#cp /bin/vi /AHPMD-LU00/vi.back1
#ls -l
drwxr-xr-t 2 root root 8192 Mar 15 11:35 lost+found
-rwxr-xr-x 1 root sys 217088 Mar 15 11:41 vi.back1
#cp vi.back1 vi.back2
#ls -l drwxr-xr-t 2 root root 8192 Mar 15 11:35 lost+found
-rwxr-xr-x 1 root sys 217088 Mar 15 11:41 vi.back1
-rwxr-xr-x 1 root sys 217088 Mar 15 11:52 vi.back2
Disk Array XP operating system configuration guide: HP-UX
/AHPMD-LU00
Kbytes used
59797 59364
2348177 9
avail %used
0 100%
2113350 0%
Mounted on
/
/AHPMD-LU00
41