How To Apply The Cuff - Omron HEM-907XL IntelliSense Instruction Manual

HEM-907XL Rev B 3/2/07 1:41 AM

HOW TO APPLY THE CUFF

The cuff of OMRON IntelliSense
collecting the information on blood vessels. Please wrap the cuff according to the procedure, below.
Do not wrap the cuff over an arm to which
intravenous injection or transfusion is being
conducted, or when otherwise contraindicated.
Do not connect the air tube or the cuff to other
equipment which is connected to intracorporeal
organ. Air embolisms may result.
• Do not inflate the cuff without being wrapped over
the arm.
• Do not use a damaged cuff.
1. Select the cuff according to the arm size
Arm circumference Name of the cuff
(7 - 9 ) 17-22 cm HEM-907-CS19 (Small)
" "
(9 - 13 ) 22-32 cm HEM-907-CR19 (Medium)
" "
(13 - 17 ) 32-42 cm HEM-907-CL19 (Large)
" "
(17 - 20 ) 42-50 cm HEM-907-CX19 (Extra Large)
" "
• Check the following before applying the cuff:
1) The bladder is correctly installed in the cuff.
2) The bladder is not twisted inside the cuff.
3) The bladder tube is protruding from the cuff as shown in
the Figure on the right.
2. Connect the air tube securely.
To use the cuff in small, medium or large size
• Connect the air tube to the main unit by securing
the air plug to the base of the air connector.
• Securely connect the air tube and the cuff/bladder
set by rotating the luer connection as shown in
the Figure on the right.
To use the cuff in extra-large size only
The extra-large cuff comes with an air tube with
an integrated air plug. Connect the air plug of the
cuff to the air connector securely when
connecting to the main unit.
Page 14
® Blood Pressure Monitor HEM-907XL plays an important role of
General advice
Cuff
Enlarged figure of
the circled part
Air tube side
Cuff side
14
Extract the air tube from
Air tube
Air connector
Air plug
.