Chauvet next NXT-1 User Manual page 28

Configuration And Operation
Once the software upgrade is complete, the IP setting on your
PC needs to be changed back to the original settings.
1. Refer to step #4 for navigation instructions on how to
access the Internet Protocol Version 4 Properties
(TCP/IPv4) dialog.
2. From the General tab, select Obtain an IP address
automatically, and click OK.
3. Continue to close the dialogs displayed until you exit out of
the Control Panel.
The installation process is complete.
Page 28 of 28
Step 13:
The examples shown are for illustrative purposes, and your product's
screens may appear slightly different.
Next™ NXT-1 User Manual Rev. 1