Mounting; Orientation; Mounting Diagram - Chauvet next NXT-1 User Manual

Setup And Installation

Mounting

Before mounting this product, read and follow the Safety Notes. For our Chauvet line of
mounting clamps, go to www.trusst.com/productcategory/accessories-clamps/.

Orientation

Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance. The Next™ NXT-1 can be suspended upright or
upside down using the 2 Omega brackets included, or it can be placed on its rubber feet on a
flat level surface.
Use the following guidelines when mounting the Next™ NXT-1:
· When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
· Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
· When hanging this product, always secure to a fastening device using a safety cable
(such as CH-05 from Chauvet).
· Place the Next™ NXT-1 so that it can move freely without hitting anything or anybody.
· Leave enough slack on the cables to prevent tension and pull on the plugs.

Mounting Diagram

Mounting Clamps
Safety Cable
Page 16 of 16
Omega Brackets
Overhead Mounting
Floor Mounting
Next™ NXT-1 User Manual Rev. 1