Chauvet next NXT-1 User Manual page 27

1. Enter the following information:
2. Enter admin in the User Name box.
3. Enter admin in the Password box.
4. Click Log In. The Next™ NXT-1 firmware window appears.
If the user name/password you entered is invalid, follow the
Factory Reset procedure.
1. From the Navigation bar, select the Upgrade tab.
2. From the Firmware Upgrade section, click Choose File.
The Open dialog appears.
1. From the Open dialog, select the file to upload the firmware
onto the Next™ NXT-1 product.
2. Click Open.
The "Downloading..." message appears in the product's
control panel.
Once the firmware finishes downloading the software, the
product will automatically reset the unit and the control panel
flickers.
Do not turn off the product during the downloading process. It
will take approximately 1 min before to reset.
1. Navigate to the Info main level.
2. Select Version.
3. Verify the product's control panel displays the uploaded
version.
The software upgrade is now complete.
Next™ NXT-1 User Manual Rev. 1
Step 9:
Step 10:
Step 11:
Step 12:
Configuration And Operation
Next
Downloading...
CHAUVET Lighting
Next NXT-1 v. x.xx
Page 27 of 27