Setup; Flexible Suction Tube - Graco 16F887 Operation Manual

Setup

Setup
Flammable fumes (such as solvent and paint fumes) in
work area can ignite or explode.
See Grounding Instructions, page 3.
Do not spray flammable or combustible liquids in a con-
fined area.
Keep spray area well-ventilated. Keep a good supply
of fresh air moving through the area.
Your sprayer is NOT compatible with harsh cleaners
such as chlorine bleach. Using these cleaners will
cause damage to the sprayer.
Do NOT shake materials to be used with this
sprayer. Some fine finish lacquers and enamels trap
air when shaken, which can affect sprayer
performance. Stir the material or check the
manufacturer's recommendation for the material
being sprayed.

Flexible Suction Tube

This sprayer comes with a suction tube that can be
adjusted for multi-directional spraying.
Spraying Ceilings, Walls and Crown
Molding
When spraying ceilings or walls, rotate the suction tube
collar to the front of the material cup.
12
NOTICE
NOTICE
ti16710a
Spraying Floors and Base Boards
When spraying floors, rotate the suction tube collar to
the back of the material cup.
NOTE: If the sprayer is angled or tilted too far, the suc-
tion tube will lose contact with the material and the
sprayer will stop spraying.
ti16709a
ti16711a
3A1698G