Procedure - Symbol PTC-960XRF User Manual

Procedure

1. Connect the PTC to the PC's COM1 serial
communication port using the appropriate
adapter cable and download cable. If you
connect to the COM2 port, you must change
the communication port setting in the
FLASHPC.EXE utility in
2. Switch to the disk drive containing the
FLASHPC.EXE utility.
• If FLASHPC.EXE is on a floppy diskette,
insert the diskette into the PC's floppy
disk drive A. Switch to this drive by
typing A: and then pressing ENTER.
• If FLASHPC.EXE is on the PC's hard
disk, switch to the drive and directory
containing FLASHPC.EXE.
3. Run FLASHPC.EXE.
• If you are reprogramming a single PTC,
type FLASHPC and then press ENTER.
• If you are reprogramming a number of
PTCs, type FLASHPC -m and then press
ENTER.
4. The PC shows the following prompt:
Telxon Flash Loader (Version X.X)
Enter the ARC image filename (return if none):
=
Enter the RF image filename (return if none):
=
5. In the appropriate space, type in the name of
the ROM image file you want to download.
Step 8.
48