Setting The Display Brightness; Entering Names For The Heating Circuits - Viessmann VITODENS Operating Instructions Manual

Setting the display contrast
Extended menu
1.
2. "Settings"

Setting the display brightness

If you would like the texts in the menu to
be more clearly legible, change the
brightness for "Control".
You can also alter the screen saver
brightness.
Extended menu
1.
2. "Settings"

Entering names for the heating circuits

You can give heating circuits 1, 2 and 3
("HC1", "HC2" and "HC3") individual
names. The abbreviations "HC1",
"HC2" and "HC3" will be retained.
Extended menu
1.
2. "Settings"
3. "Name for heating circ."
4. "Heating circuit 1", "Heating circuit
2" or "Heating circuit 3"
5. "Change"
6. You can select the required character
using "Change with (".
Further adjustments
3. "Contrast"
4. Set the required contrast.
3. "Brightness"
4. "Control" or "Screen saver"
5. Set the required brightness.
7. "Select with Ø" takes you to the next
character.
8. Press OK to accept all entered char-
acters at once and simultaneously exit
this menu.
Note
The entered term is deleted with
"Reset?"; then "Heating circuit 1"
will be shown again.
Example:
Name for "Heating circuit 2": Apart-
ment
29