Table of Contents
Advertisement
EVO XS
Manual
4.6.1.3. Program reservation
The individual programs (events) displayed on the EPG are possible to be
reserved automatically. If you press the red button "Timer" (or in some software
versions described also as "Reservation"), the program (event) that you have
selected with cursor, is reserved automatically. A timer with all the time data is
automatically preset. You only need to press OK.
4.6.2. Information about a currently activated channel
4.6.2.1. Information banner
• Current time and transmission mode (TV or Radio)
•
Current channel number & name.
•
Satellite name & TP information.
• Information symbols (if in the current signal available): Teletext (T ),
FTA/scrambled, when scrambled, in which CAS (FTA / $).
•
Symbols for Parental lock and Age limit information.
•
The start and end time of the current/next program (if information is available).
•
The info bar will display each time the channel is changed displayed.
•
While viewing a channel, the Page Up/Down button will also display the INFO
bar. You can scroll the INFO bar up or down through the channels while
continuing to view the same channel on the screen. After scrolling the INFO
bar through the channels, you can press OK, and the receiver will change to
that channel. If you do not press OK to select the channel, the INFO bar will
disappear and you can continue to watch the same channel.
Every time you change channels, program
information will be displayed for a few
seconds. The amount of time displayed
is controlled by the OSD setting in the
User Setup menu. The default OSD INFO
Timer is 5 seconds.
The information may include:
42
User's
Advertisement
Table of Contents
