Table of Contents
Advertisement
EVO XS
Manual
4.4.2.2 STB to STB Updating Software without TV
1.
Connect RS232C cable between MASTER receiver and SLAVE receiver, and
power on the MASTER receiver first.
2. Power on the SLAVE receiver. Down
MASTER receiver's display. Once the downloading is completed, SLAVE r
will be rebooted while "END" message appears at the MASTER receiver's display.
3. If you want to download from the same MASTER receiver to another SLAVE
receiver, you need to power off and reboot the MASTER receiver.
4
.4.2.3 Channel List Transfer
The Chapter 4.3: of this manual is dedicated the proc
channels list actualizations in all details. Beyond that, it is possible to upload
the Channels List from receiver to computer, and to modify the Channel list on
computer, using a service software named "Channel Editor", and then the
modified Channel List can be downloaded back into the receiver. Realization of
this procedure is intended to be done by service specialists.
loading process will appear at the
38
User's
eceiver
edures referred to
Advertisement
Table of Contents
