Data Reset; System Information - Az-Box EVO XS User Manual

EVO XS
Manual
4

.4.3. Data Reset

default, as will the user preference
the system to the factory default, move cursor on this option confirming its selection
by pressing OK. Before this procedure is started, a warning message appears,
asking you to enter your password (if your own password is not available, write
0000) warning from the effect of deleting all actual settings getting the receiver back
to factory settings. If you press OK. again this operation will be definitely executed.
If you press the EXIT key, the function will be cancelled and return to the System
Setup Menu.
• Delete All Channels
warning message
• Delete Satellite C
now without a waring message
4

.4.4. System Information

s
: All channels, for all satellites will be deleted – now without a
hannels: Deletes only the channels for a specified satellite –
M oving cursor up to „Data Reset" option in
the „System Setup" menu, confirming this
selection by pressing OK., a submenu with
the same title is activated. It involves:
Factory Default, Delete All Channels and
Delete Satellite Channels.
•
Factory Default:
transponder lists will be set to the factory
ettings. When you are ready to confirm setting
T his displays general information about
which hardware and software version you
receiver is running on.
39
User's
All satellite and
r