Table of Contents
Advertisement
EVO XS
Manual
2.2. REAR PANEL CONFIGURATION
1.
ANT. IN: Satellite dish input (F-connector).
Loop : Used for a connection to another STB.
2.
3.
IF OUT: For connecting an RF cable to the aerial input of a TV..
4.
IF IN: For a terrestrial (conventional) TV aerial
5.
Audio R/L RCA Connectors: Stereo outputs. Connect these terminals
to audio L/R input terminals of TV, VCR or audio system.
6.
0/12V AND S/PDIF: 0V, 12V output or S/PDIF output (OPTION)
7.
Video RCA Connector: Connect this terminal to the corresponding
video input terminal of TV or VCR
8.
RS-232C Serial Port: A customer service representative can use this
port to re-load preprogrammed channel information to the STB. This
port can also be used for upgrading software.
9.
Power Cord: Connect to power outlet
RS 232C Connection Configuration
Pin No
Satellite Receiver
2
Rx →
3
Tx →
5
Gnd →
PC
→ Tx
→ Rx
→ Gnd
12
User's
Pin No
3
2
5
Advertisement
Table of Contents
